page . 1 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 features ? planar structure with epi wafer ? ultrafast recovery time, low v f and soft recovery ? for pfc dcm operation ? low leakage current ? plastic package has underwriters laboratory flammability classification 94v-o flame retardant epoxy molding compound ? exceeds environmental standards of mil-s-19500/228 ? lead free in compliance with eu rohs 2011/65/eu directive ? green molding compound as per iec61249 std. . (halogen free) (to-252) superfast recovery rectifiers voltage 600 volt 4 ampere current mechanical data ? case: to-220ac, ito-220ac, to-263, to-252 package ? terminals: lead solderable per mil-std-750, method 2026 ? to-220ac we ight: 0.065 ounces, 1.859 grams ? ito-220ac weight: 0.055 ounces, 1.5615 grams ? to-263 we ight: 0.051 ounces, 1.46 grams ? to-252 we ight: 0.0104 ounces, 0.297 grams maximum ratings(t a =25 o c unless otherwise noted) note : 1. device mounted on a infinite heatsink , then measured the center of the marking side. 2. device mounted on a 10cm*10cm*0.5mm copper pad area , then measured the center of the marking side. parameter symbol value unit maximum recurrent peak reverse voltage v rrm 600 v maximum rms voltage v rms 420 v maximum dc blocking voltage v r 600 v maximum average forward rectified current i f(av) 4a peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 35 a typical thermal resistance to-220ac(note 1) ito-220ac(note 1) to-263 (note 1) to-252 (note 2) r ? jc 2 5.5 2 5.5 o c/w operating junction temperature range t j -55 to + 150 o c storage temperature range t stg -55 to + 150 o c 4 5 7 2 $ & 4 5 ) , 7 2 $ & 4 5 ' 7 2 4 ' 6 7 2
page . 2 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 electrical characteristics(t a =25 o c unless otherwise noted) parameter symbol test conditions min. typ. max. unit breakdown voltage v br i r =100 ? at j =25 o c600 - - v instantaneous forward voltage v f i f =1a i f =4a t j =25 o c - - 1.02 1.23 - 1.45 v i f =1a i f =4a t j =125 o c - - 0.84 1.1 - 1.3 v reverse leakage current i r v r =600v t j =25 o c t j =125 o c - - - - 3 100 ? a reverse recovery time t rr i f =0.5a i r =1a i rr =0.25a t j =25 o c- - 45 ns i f =1a v r =30v di/dt=100a/ ? s t j =25 o c- - 35 ns i f =4a v r =400v di/dt=200a/ ? s t j =25 o c- 60 - ns peak recovery current i rrm i f =4a v r =400v di/dt=200a/ ? s t j =25 o c- 4 - a reverse recovery charge q rr i f =4a v r =400v di/dt=200a/ ? s t j =25 o c- 135 - nc
page . 3 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 0 1 2 3 4 5 0 25 50 75 100 125 150 t c , cas e t e m per atur e ( c) i f , f o r w ar d cur r ent ( a ) 0. 0001 0. 001 0. 01 0. 1 1 10 10 20 30 40 50 60 70 80 90 100 i r , rever s e cur r ent ( a) per c ent of rated peak rever s e voltage ( % ) t j = 2 5 c t j = 7 5 c t j = 125 c t j = 150 c fig.3 t y pical reverse characteristics fig.1 forw a rd current derating curve fig.2 t y pical junction capacitance 1 10 100 11 0 1 0 0 c j , j unc tion capac itanc e ( pf ) v r , rever s e bias voltage ( v ) fig.4 t y pical forw ard characteristics 0. 01 0. 1 1 10 0 0 .5 1 1 .5 i f , f o r w ar d cur r ent ( a ) v f , f or w ar d voltage ( v ) t j = 150 c t j = 1 2 5 c t j = 2 5 c t j = 7 5 c fig.3 t y pical reverse characteristics fig.4 t y pical forw ard characteristics fig.5 ty pical r e v e r se r ecov e r y time v e r s us di/dt fig.6 ty pical r e v e r se r ecov e r y char ges v e r s us di/dt 0 20 40 60 80 100 120 140 160 50 100 150 200 250 300 t rr (n s) di / dt ( a / s) v r = 400v t j = 125 o c 0 50 100 150 200 250 300 350 50 100 150 200 250 300 qrr (n c) di / dt ( a / s) v r = 400v t j =1 2 5 o c i f =i o i f =i o
page . 4 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 0.406(10.3) 0.381(9.7) 0.134(3.4) 0.118(3.0) 0.112(2.85) 0.100(2.55) 0.063(1.6)max. 0.055(1.4) 0.039(1.0) 0.055(1.4) 0.039(1.0) 0.028(0.7) 0.019(0.5) 0.100(2.55) 0.100(2.55) 0.272(6.9) 0.248(6.3) 0.606(15.4) 0.583(14.8) 0.177(4.5) 0.137(3.5) 0.543(13.8) 0.512(13.0) 0.189(4.8) 0.165(4.2) 0.130(3.3) 0.114(2.9) 0.114(2.9) 0.098(2.5) 0.027(0.67) 0.022(0.57) 0.128(3.25) min. 0.409(10.4) 0.387(9.80) 0.110(2.8) 0.055(1.4) 0.039(1.0) 0.108(2.75) 0.092(2.35) 0.108(2.75) 0.092(2.35) 0.357(9.1) 0.335(8.5) 0.418(10.6) 0.378(9.60) 0.035(0.9)max. 0.189(4.8) 0.137(4.4) 0.055(1.4) 0.047(1.2) 0.026(0.7) 0.011(0.3) 0.236(6.0) 0.197(5.0)
page . 5 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 mounting pad layout order information ? packing information t/r - 3k per 13" plastic reel
page . 6 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 mounting pad layout order information ? packing information t/r - 0.8k per 13" plastic reel
page . 7 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 part no_packing code_version qr406_t0_00001 qr406_t0_10001 qr406f_t0_00001 qr406f_t0_10001 qr406d_r2_00001 qr406d_r2_10001 QD406S_t0_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 8 qr406/qr406f/qr406d/QD406S may 8,2014-rev.00 disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
